ELAN WAX HEATER

INSTRUCTION MANUAL

1. Place the wax into the container.

2. Connect the device to the power source.

3. Choose the desired temperature from modes 1-6 using the thermostat (the power indicator light will turn red).

4. Once the wax has melted, use the thermostat to set the temperature you wish to maintain.

5. After use, turn off the device and disconnect it from the power source.

 

SAFETY AND CLEANING

– Never leave the device on when the wax container is empty.

– Clean the wax heater using oil-based products specifically designed for wax removal.

 

NOTE! DO NOT USE ACID-BASED CLEANERS, AS THEY MAY DAMAGE THE WAX HEATER AND VOID WARRANTY.

 

– Do not place plastic containers with wax directly into the heater unless specified by the wax manufacturer.

– The wax heater is not intended for use by unsupervised children.

– Avoid using the wax heater near bathtubs, shower stalls, sinks, or other water containers.

– Always maintain the device’s cleanliness and prevent wax from coming into contact with the temperature control.

 

NOTE! ALWAYS TEST A SMALL AMOUNT OF WAX FOR TEMPERATURE BY APPLYING IT TO THE INSIDE OF THE WRIST BEFORE APPLICATION

 

– Use only solvents specifically designed for cleaning the wax heater, as using other solvents may damage the device and produce toxic fumes when heated.